1U

• Designed for printed circuit board mounting and used within applications such as Telecommunication, UPS and other power conversion systems.
• Devised for both interrupted and uninterrupted loads, the PC60 is suitable for switching Resistive, Capacitive and Inductive loads.
• Secured to the printed circuit board by means of an M4 bolt.

Note: The PC range now incorporates the mounting board option, previously assigned to the MB range (existing MB part numbers remain valid).

• Designed for printed circuit board mounting and used within applications such as Telecommunication, UPS and other power conversion systems.
• Devised for both interrupted and uninterrupted loads, the PC61 is suitable for switching Resistive, Capacitive and Inductive loads.
• Secured to the printed circuit board by means of an M4 bolt.

Note: The PC range now incorporates the mounting board option, previously assigned to the MB range (existing MB part numbers remain valid).

• Designed for printed circuit board mounting used within applications such as Telecommunication, UPS and other power conversion systems..
• Devised for both interrupted and uninterrupted loads, the PC63 is suitable for switching Resistive, Capacitive and Inductive loads.
• Secured to the printed circuit board by means of an M4 bolt.

Note: The PC range now incorporates the mounting board option, previously assigned to the MB range (existing MB part numbers remain valid).

• Designed for printed circuit board mounting and used within applications such as Telecommunication, UPS and other power conversion systems.
• Devised for both interrupted and uninterrupted loads, the PC100 is suitable for switching Resistive, Capacitive and Inductive loads.
• Secured to the printed circuit board by means of an M4 bolt.

• Designed for Direct Current Loads where where infrequent switching is specified, typical applications include in line contactors and Power Distribution Systems.
• Developed for Uninterrupted current loads the RU80 is suitable for switching Resistive, Capacitive and Inductive loads.
•  M8 stud main terminals and 6.3mm spade coil connections.
• Adaptable Mounting options, in any orientation (seek technical advice for full mounting considerations).

• Designed for Direct Current loads, typical applications include motors as used on small electric vehicles and hydraulic power packs.
• Developed for both interrupted and uninterrupted loads, and is suitable for switching Resistive, Capacitive and Inductive loads.
• M8 stud main terminals and 6.3mm spade coil connections.
• Adaptable Mounting options, in any orientation (seek technical advice for full mounting considerations).

• Designed for direct current loads, typical applications include, but are not limited to, electric motors, hydraulic power packs, winches, speed controllers, UPS and Power Distribution Systems.
• Developed for Interrupted and Uninterrupted loads it is suitable for switching Resistive, Capacitive and Inductive loads.
• M8 stud main terminals and 6.3mm spade coil connections.
• Adaptable Mounting options, in any orientation (seek technical advice for full mounting considerations).

View Product

• Designed for direct current loads, including motors as used on electric vehicles such as industrial trucks, and telecom and power distribution applications.
• Developed for both interrupted and uninterrupted loads, the SW80 is suitable for switching Resistive, Capacitive and Inductive loads.
• M8 stud main terminals and 6.3mm spade coil connections.
• Adaptable Mounting options, in any orientation (seek technical advice for full mounting considerations).

• Designed to be installed within the confines of a Power Distribution System 1U rack.
• Developed for uninterrupted loads and primarily for use with direct current loads but can be used for alternating current loads.
• Silver plating on the main contacts is standard.
• To suit the limitations of space of a 1U rack, the coil connections are supplied as flying leads.
• Adaptable Mounting options, in any orientation (seek technical advice for full mounting considerations).

• Developed primarily for use with Uninterrupted Direct Current loads but can also be used with Alternating Currents.
• Designed to be installed within the confines of a Power Distribution System 1U rack.
• 6.3mm spade coil connections or flying leads.
• Adaptable Mounting options, in any orientation (seek technical advice for full mounting considerations).