1U

• Designed for printed circuit board mounting and used within applications such as Telecommunication, UPS and other power conversion systems.
• Devised for both interrupted and uninterrupted loads, the PC60 is suitable for switching Resistive, Capacitive and Inductive loads.
• Secured to the printed circuit board by means of an M4 bolt.

Note: The PC range now incorporates the mounting board option, previously assigned to the MB range (existing MB part numbers remain valid).

• Designed for printed circuit board mounting and used within applications such as Telecommunication, UPS and other power conversion systems.
• Devised for both interrupted and uninterrupted loads, the PC61 is suitable for switching Resistive, Capacitive and Inductive loads.
• Secured to the printed circuit board by means of an M4 bolt.

Note: The PC range now incorporates the mounting board option, previously assigned to the MB range (existing MB part numbers remain valid).

• Designed for printed circuit board mounting used within applications such as Telecommunication, UPS and other power conversion systems..
• Devised for both interrupted and uninterrupted loads, the PC63 is suitable for switching Resistive, Capacitive and Inductive loads.
• Secured to the printed circuit board by means of an M4 bolt.

Note: The PC range now incorporates the mounting board option, previously assigned to the MB range (existing MB part numbers remain valid).

• Designed for printed circuit board mounting and used within applications such as Telecommunication, UPS and other power conversion systems.
• Devised for both interrupted and uninterrupted loads, the PC100 is suitable for switching Resistive, Capacitive and Inductive loads.
• Secured to the printed circuit board by means of an M4 bolt.

• Conçu pour des charges en courant continu, y compris les moteurs utilisés sur les véhicules électriques tels que les camions industriels, ainsi que pour les applications télécom et de distribution d’électricité.
• Développé pour les charges interrompues et non interrompues, le SW80 convient aux charges résistives, capacitives et inductives commutées.
• Bornes principales à montants M8 et connexions en spirale de 6,3 mm.
• Options de montage adaptable, dans n’importe quelle orientation (demandez conseil technique pour des considérations complètes sur le montage).

• Designed to be installed within the confines of a Power Distribution System 1U rack.
• Developed for uninterrupted loads and primarily for use with direct current loads but can be used for alternating current loads.
• Silver plating on the main contacts is standard.
• To suit the limitations of space of a 1U rack, the coil connections are supplied as flying leads.
• Adaptable Mounting options, in any orientation (seek technical advice for full mounting considerations).