Coil Termination Options
A variety of coil terminations are available for the majority of our contactors including a 6.3mm faston, M5 stud termination and flying leads which are amongst the most common options. The options available are:
AMP Push Fit
The standard coil termination for Albright, offers either 6.3mm or 4.7mm push fit coil termination.
Flying Leads ‘F’
Leads with a variety of terminations (Plug, Wire or Ring Terminal) can be used to aid installation. The length and colour of the leads can be determined by the customer.
Plug
A mechanically fastened terminal, this 2 pin plug and socket connector type is widely used in the automotive sector. It is commonly referenced as a JPT Connector and Albright provide an integrated coil plug that is directly compatible with its socket counterpart – TE Connectivity part number 282189.
M4/M5 Terminal Board/Stud Fitting
This option allows the connection of suitable ring terminals to the coil, and replaces the standard push fit terminals. Note: the SW60 series and all ‘P’ type contactors have only the option of M4 stud terminals, which are mounted to the AMP terminals.
Custom Made Alternatives
If our standard options are not suitable for your needs, we have alternative options available, please contact our technical department for further details.