- Designed for Direct Current loads, typical applications include motors as used on small electric vehicles such as light industrial trucks and powered cars.
- These contactors are not polarity sensitive thus they can be used for switching Alternating Current loads.
- M8 stud main terminals and 6.3mm spade coil connections.
- Adaptable Mounting options, in any orientation (seek technical advice for full mounting considerations).
Please note Normally Closed contacts are not suited to make and break load.
This product has limited availability, please refer to our Product Obsolescence page for further information.
Spare Parts – Please consult our Technical Department, or download Spare Parts Sheet where available.
SW132 Technical Info
| Application | InterruptedRating (Ith) | UninterruptedRating (Ith) |
|---|---|---|
| Thermal Current Rating | 100A | 100A |
| Intermittent Current Rating: | ||
| 30% Duty | 210A | 210A |
| 40% Duty | 190A | 190A |
| 50% Duty | 170A | 170A |
| 60% Duty | 150A | 150A |
| 70% Duty | 140A | 140A |
| Rated Fault Current Breaking Capacity (lcn) 5ms Time Constraint: (In accordance with UL583*) | ||
| Blowouts | - | |
| No Blowouts | 1000A at 80V D.C. | |
| Rated Fault Current Breaking Capacity (lcn) Resistive Load: (In accordance with UL508*) | ||
| Blowouts | - | |
| No Blowouts | - | |
| Maximum Recommended Contact Voltages | ||
| Blowouts | - | - |
| No Blowouts | 80V | 96V |
| Typical Voltage Drop per pole across New Contacts at 100A | 40mV | |
| Mechanical Durability | >3,000,000 Cycles | |
| Coil Voltage Available (Us) (Rectifier board required for A.C.) | >6 - 240V | |
SW132 Features
Click on an optional feature to automatically add this selection to the enquiry form below
| Component | Configurations |
|---|---|
| AC Rectifier | |
| Auxiliary | |
| Coil Suppression | |
| Coil Termination | |
| Contact Tip | |
| Fixed Contact Terminal | |
| Mounting | |
| Vacuum Impregnation |