- Conçu pour des charges en courant continu, y compris les moteurs généralement utilisés sur les véhicules électriques tels que les camions industriels.
- Développé pour les charges interrompues et non interrompues, le SW185 convient aux charges résistives, capacitives et inductives commutantes.
- Bornes principales à montants M8 et connexions en spirale de 6,3 mm.
- Options de montage adaptable, dans n’importe quelle orientation (demandez conseil technique pour des considérations complètes sur le montage).
Note : Les contacts normalement fermés ne sont pas adaptés à la charge de formation et de rupture.
Spare Parts – Please consult our Technical Department, or download Spare Parts Sheet where available.
SW185 Technical Info
| Application | InterruptedRating (Ith) | UninterruptedRating (Ith) |
|---|---|---|
| Thermal Current Rating | 150A | 150A |
| Intermittent Current Rating: | ||
| 30% Duty | 275A | 275A |
| 40% Duty | 235A | 235A |
| 50% Duty | 210A | 210A |
| 60% Duty | 195A | 195A |
| 70% Duty | 180A | 180A |
| Rated Fault Current Breaking Capacity (lcn) 5ms Time Constraint: (In accordance with UL583*) | ||
| Blowouts | 1000A at 96V D.C. | |
| No Blowouts | 1000A at 48V D.C. | |
| Rated Fault Current Breaking Capacity (lcn) Resistive Load: (In accordance with UL508*) | ||
| Blowouts | A at V D.C. | |
| No Blowouts | A at V D.C. | |
| Maximum Recommended Contact Voltages | ||
| Blowouts | 96V | 96V |
| No Blowouts | 48V | 48V |
| Typical Voltage Drop per pole across New Contacts at 150A | 30mV | |
| Mechanical Durability | >0 Cycles | |
| Coil Voltage Available (Us) (Rectifier board required for A.C.) | >6 - 240V | |
SW185 Features
Click on an optional feature to automatically add this selection to the enquiry form below
| Component | Configurations |
|---|---|
| Auxiliary | |
| Blowouts | |
| Coil Suppression | |
| Coil Termination | |
| Contact Tip | |
| Enclosed Top Cover | |
| Fixed Contact Terminal | |
| Mounting | |
| Steel Shroud EE | |
| Vacuum Impregnation |
